- mice-discuss - lists.micemn.net

Akamai having issues today?

by Frank Bulk

Saw it down from 2:41 to 4:28 pm today, and now again 6:23 pm: Aug 18 14:41:03 192.168.0.85 BGP: Peer 206.108.255.84 DOWN (Hold Timer Expired) Aug 18 14:41:05 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 DOWN (Hold Timer Expired) Aug 18 16:28:08 192.168.0.85 BGP: Peer 206.108.255.84 UP (ESTABLISHED) Aug 18 16:28:27 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 UP (ESTABLISHED) Aug 18 18:23:54 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 DOWN (Hold Timer Expired) Aug 18 18:23:58 192.168.0.85 BGP: Peer 206.108.255.84 DOWN (Hold Timer Expired) Frank

Aug. 18, 2017

Output queue drops on Juniper 1G ports

by Jason Hanke

On the 1G ports on the main switch, are we seeing output queue drops on any of the ports? I just noticed some on a 1G link on my remote that was about 25% full (egress). -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 18, 2017

Re: NetValue Contact Update

by Richard Laager

On 08/17/2017 01:57 PM, Jason Hanke wrote: > Netvalue has requested a change to their email contact > to noc(a)ecitacion.com <mailto:noc@ecitacion.com>. I have updated the website. -- Richard

Aug. 17, 2017

NetValue Contact Update

by Jason Hanke

Netvalue has requested a change to their email contact to noc(a)ecitacion.com. Thanks! -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 17, 2017

FutureTech Port 10G Upgrade

by Jason Hanke

FutureTech will be upgrading from a 1G to a 10G port. Their new port will be xe-0/0/9 on the Neutral Path Remote. Their old port ge-0/0/8 will be deactivated following migration. Thanks! -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 14, 2017

Please welcome NetVaule to MICE!

by Jason Hanke

Company Name: NetValue Inc. ASN: 8095 IPv4: 206.108.255.28/24 IPv6: 2001:504:27:0:0:1f9f::1/64 Route Server Connection (yes/no): yes BFD Support (yes/no): Yes Peering Contact Email address: peering(a)netvalueinc.com Remote port assignment number: MN Voip Remote gig2/11 Welcome Aboard! -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 8, 2017

Re: New Cabinet Pics

by Justin Krejci

Correct, definitely intended; I am guessing more than a few recognize it. :) <context> Kind of an iconic and old side scroller video game, the intro of which was the command: RISE FROM THE GRAVE </context> ________________________________________ From: MICE Discuss [MICE-DISCUSS(a)LISTS.IPHOUSE.NET] on behalf of Chris Wopat [wopat(a)WISCNET.NET] Sent: Monday, July 31, 2017 1:57 PM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] New Cabinet Pics On 07/31/2017 01:55 PM, DeLong, Owen wrote: > Methinks that was not the intended link. > > Owen > >> On Jul 31, 2017, at 11:08 , Justin Krejci <jkrejci(a)usinternet.com> wrote: >> >> https://www.youtube.com/watch?v=hihEhsdwiIk >> >> I am resurrecting this thread. Oh it's correct, may just need volume + context ^ -- Chris Wopat Network Engineer, WiscNet wopat(a)wiscnet.net 608-210-3965

July 31, 2017

Re: New Cabinet Pics

by Chris Wopat

On 07/31/2017 01:55 PM, DeLong, Owen wrote: > Methinks that was not the intended link. > > Owen > >> On Jul 31, 2017, at 11:08 , Justin Krejci <jkrejci(a)usinternet.com> wrote: >> >> https://www.youtube.com/watch?v=hihEhsdwiIk >> >> I am resurrecting this thread. Oh it's correct, may just need volume + context ^ -- Chris Wopat Network Engineer, WiscNet wopat(a)wiscnet.net 608-210-3965

July 31, 2017

Re: New Cabinet Pics

by DeLong, Owen

Methinks that was not the intended link. Owen > On Jul 31, 2017, at 11:08 , Justin Krejci <jkrejci(a)usinternet.com> wrote: > > https://www.youtube.com/watch?v=hihEhsdwiIk > > I am resurrecting this thread. If anyone is still interested in this kind of a solution of the breakout panel, I had my go-to guy for miscellaneous fiber bits and pieces get me a price on a few of these breakout panels with various options as I have run into a need for this type of product myself. Let me know if you want more info and I can pass you over his part numbers and his contact details. > > > > ________________________________________ > From: MICE Discuss [MICE-DISCUSS(a)LISTS.IPHOUSE.NET] on behalf of Jeremy Lumby [jlumby(a)MNVOIP.COM] > Sent: Wednesday, May 10, 2017 7:36 PM > To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET > Subject: Re: [MICE-DISCUSS] New Cabinet Pics > > Andy, > > I have received quite a few questions about the QSFP breakout panel, so I decided to answer your question plus more detail on list. I wish I had more info for you. I obtained it from a remote hands uninstall I did, and the owner did not care to have me ship it back. It has no markings on it, so I have no clue who made it, or what its model number might be. The main reason I loaned it to MICE was because the new switch had almost the same number of 10G ports that the old Juniper stack had. Since we were out of ports, had to delay new member connections, and needed extras to tie the Arista to the Juniper stack, I utilized QSFPs to get additional 10G ports to tie the switches together, as well as to connect all members that had expressed an interest in upgrading to 100G in the near future. This freed up a bunch of SFP+ ports for immediate use by new members. Since the process began, we have already had 3 QSFP28 100G connections go live freeing up 9 SFP+ ports. > > Jeremy > > -----Original Message----- > From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Andy Koch > Sent: Wednesday, May 10, 2017 4:26 PM > To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET > Subject: Re: [MICE-DISCUSS] New Cabinet Pics > > Thank you Jeremy, looking good. > > Question on the QSFP breakout panel: WiscNet is evaluating a couple of > these, but I have not seen the model that is installed here. What was > the source of this panel and do you have a model/manufacturer? > > Thanks for the info. > > Andy > > -- > Andy Koch > Network Engineer, WiscNet > akoch(a)wiscnet.net 608-210-3967 > > 10 May 2017 at 14:37:00, Jeremy Lumby wrote: >> I officially cleaned out the old 1/3 MICE cabinet today, and got some pictures of the new cabinet. I left them full resolution so that you can use them for other things. Since they were so large, I did not want to attach them, so they are at the following links. Special thanks again to Cologix, Anthony, Doug, Richard, and Jay for their assistance with the migration. >> >> http://www.mnvoip.com/mice/newcab1.jpg >> >> http://www.mnvoip.com/mice/newcab2.jpg >> >> http://www.mnvoip.com/mice/newcab3.jpg >> >> >> Jeremy Lumby >> Minnesota VoIP >> 9217 17th Ave S >> Suite 216 >> Bloomington, MN 55425 >> Main: 612-355-7740 x211 >> Direct: 612-392-6814 >> EFax: 952-873-7425 >> jlumby(a)mnvoip.com

July 31, 2017

Re: New Cabinet Pics

by Justin Krejci

https://www.youtube.com/watch?v=hihEhsdwiIk I am resurrecting this thread. If anyone is still interested in this kind of a solution of the breakout panel, I had my go-to guy for miscellaneous fiber bits and pieces get me a price on a few of these breakout panels with various options as I have run into a need for this type of product myself. Let me know if you want more info and I can pass you over his part numbers and his contact details. ________________________________________ From: MICE Discuss [MICE-DISCUSS(a)LISTS.IPHOUSE.NET] on behalf of Jeremy Lumby [jlumby(a)MNVOIP.COM] Sent: Wednesday, May 10, 2017 7:36 PM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] New Cabinet Pics Andy, I have received quite a few questions about the QSFP breakout panel, so I decided to answer your question plus more detail on list. I wish I had more info for you. I obtained it from a remote hands uninstall I did, and the owner did not care to have me ship it back. It has no markings on it, so I have no clue who made it, or what its model number might be. The main reason I loaned it to MICE was because the new switch had almost the same number of 10G ports that the old Juniper stack had. Since we were out of ports, had to delay new member connections, and needed extras to tie the Arista to the Juniper stack, I utilized QSFPs to get additional 10G ports to tie the switches together, as well as to connect all members that had expressed an interest in upgrading to 100G in the near future. This freed up a bunch of SFP+ ports for immediate use by new members. Since the process began, we have already had 3 QSFP28 100G connections go live freeing up 9 SFP+ ports. Jeremy -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Andy Koch Sent: Wednesday, May 10, 2017 4:26 PM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] New Cabinet Pics Thank you Jeremy, looking good. Question on the QSFP breakout panel: WiscNet is evaluating a couple of these, but I have not seen the model that is installed here. What was the source of this panel and do you have a model/manufacturer? Thanks for the info. Andy -- Andy Koch Network Engineer, WiscNet akoch(a)wiscnet.net 608-210-3967 10 May 2017 at 14:37:00, Jeremy Lumby wrote: > I officially cleaned out the old 1/3 MICE cabinet today, and got some pictures of the new cabinet. I left them full resolution so that you can use them for other things. Since they were so large, I did not want to attach them, so they are at the following links. Special thanks again to Cologix, Anthony, Doug, Richard, and Jay for their assistance with the migration. > > http://www.mnvoip.com/mice/newcab1.jpg > > http://www.mnvoip.com/mice/newcab2.jpg > > http://www.mnvoip.com/mice/newcab3.jpg > > > Jeremy Lumby > Minnesota VoIP > 9217 17th Ave S > Suite 216 > Bloomington, MN 55425 > Main: 612-355-7740 x211 > Direct: 612-392-6814 > EFax: 952-873-7425 > jlumby(a)mnvoip.com

July 31, 2017