- mice-discuss - lists.micemn.net

Re: Please add 10G port to HE

by Jeremy Lumby

5/21 has been added to their bundle on the main switch From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jason Hanke Sent: Monday, August 28, 2017 9:31 AM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: [MICE-DISCUSS] Please add 10G port to HE Hurricane Electric would like one additional 10G port added to their existing LAG group. Ethernet5/21 has been allocated for them on the main switch. Thanks! -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Aug. 28, 2017

Please add 10G port to HE

by Jason Hanke

Hurricane Electric would like one additional 10G port added to their existing LAG group. Ethernet5/21 has been allocated for them on the main switch. Thanks! -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 28, 2017

Re: Please Welcome Lakana to MICE!

by Doug McIntyre

On Thu, Aug 24, 2017 at 10:41:30AM -0500, Jason Hanke wrote: >Name: Lakana >ASN: 32029 >Port: ge-0/0/9 (Main Copper Switch) >IPv4: 206.108.255.83/24 >IPv6: 2001:504:27:0:0:7e3a::1 >Route Server: Yes >BFD: No >Peering Contact Email: netops(a)lakana.com All set to go on the route servers. Welcome aboard! -- Doug McIntyre <merlyn(a)iphouse.net> ~.~ ipHouse ~.~ Network Engineer/Provisioning/Jack of all Trades

Aug. 25, 2017

Please Welcome Lakana to MICE!

by Jason Hanke

Name: Lakana ASN: 32029 Port: ge-0/0/9 (Main Copper Switch) IPv4: 206.108.255.83/24 IPv6: 2001:504:27:0:0:7e3a::1 Route Server: Yes BFD: No Peering Contact Email: netops(a)lakana.com Billing Info: Lakana ATTN: Accounts Payable 355 Randolph Ave Suite 100 St. Paul, MN 55102 -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 24, 2017

Re: Akamai having issues today?

by DeLong, Owen

I believe we were doing a router upgrade in anticipation of providing 100G capacity to MICE and some of our other peers on that ECOR. Owen > On Aug 18, 2017, at 16:29 , Frank Bulk <fbulk(a)mypremieronline.com> wrote: > > Saw it down from 2:41 to 4:28 pm today, and now again 6:23 pm: > > Aug 18 14:41:03 192.168.0.85 BGP: Peer 206.108.255.84 DOWN (Hold Timer Expired) > Aug 18 14:41:05 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 DOWN (Hold Timer Expired) > Aug 18 16:28:08 192.168.0.85 BGP: Peer 206.108.255.84 UP (ESTABLISHED) > Aug 18 16:28:27 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 UP (ESTABLISHED) > Aug 18 18:23:54 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 DOWN (Hold Timer Expired) > Aug 18 18:23:58 192.168.0.85 BGP: Peer 206.108.255.84 DOWN (Hold Timer Expired) > > Frank

Aug. 22, 2017

Akamai having issues today?

by Frank Bulk

Saw it down from 2:41 to 4:28 pm today, and now again 6:23 pm: Aug 18 14:41:03 192.168.0.85 BGP: Peer 206.108.255.84 DOWN (Hold Timer Expired) Aug 18 14:41:05 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 DOWN (Hold Timer Expired) Aug 18 16:28:08 192.168.0.85 BGP: Peer 206.108.255.84 UP (ESTABLISHED) Aug 18 16:28:27 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 UP (ESTABLISHED) Aug 18 18:23:54 192.168.0.85 BGP: Peer 2001:504:27::51cc:0:1 DOWN (Hold Timer Expired) Aug 18 18:23:58 192.168.0.85 BGP: Peer 206.108.255.84 DOWN (Hold Timer Expired) Frank

Aug. 18, 2017

Output queue drops on Juniper 1G ports

by Jason Hanke

On the 1G ports on the main switch, are we seeing output queue drops on any of the ports? I just noticed some on a 1G link on my remote that was about 25% full (egress). -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 18, 2017

Re: NetValue Contact Update

by Richard Laager

On 08/17/2017 01:57 PM, Jason Hanke wrote: > Netvalue has requested a change to their email contact > to noc(a)ecitacion.com <mailto:noc@ecitacion.com>. I have updated the website. -- Richard

Aug. 17, 2017

NetValue Contact Update

by Jason Hanke

Netvalue has requested a change to their email contact to noc(a)ecitacion.com. Thanks! -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 17, 2017

FutureTech Port 10G Upgrade

by Jason Hanke

FutureTech will be upgrading from a 1G to a 10G port. Their new port will be xe-0/0/9 on the Neutral Path Remote. Their old port ge-0/0/8 will be deactivated following migration. Thanks! -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 14, 2017

Please welcome NetVaule to MICE!

by Jason Hanke

Company Name: NetValue Inc. ASN: 8095 IPv4: 206.108.255.28/24 IPv6: 2001:504:27:0:0:1f9f::1/64 Route Server Connection (yes/no): yes BFD Support (yes/no): Yes Peering Contact Email address: peering(a)netvalueinc.com Remote port assignment number: MN Voip Remote gig2/11 Welcome Aboard! -- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke(a)neutralpath.net www.neutralpath.net

Aug. 8, 2017

Re: New Cabinet Pics

by Justin Krejci

Correct, definitely intended; I am guessing more than a few recognize it. :) <context> Kind of an iconic and old side scroller video game, the intro of which was the command: RISE FROM THE GRAVE </context> ________________________________________ From: MICE Discuss [MICE-DISCUSS(a)LISTS.IPHOUSE.NET] on behalf of Chris Wopat [wopat(a)WISCNET.NET] Sent: Monday, July 31, 2017 1:57 PM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] New Cabinet Pics On 07/31/2017 01:55 PM, DeLong, Owen wrote: > Methinks that was not the intended link. > > Owen > >> On Jul 31, 2017, at 11:08 , Justin Krejci <jkrejci(a)usinternet.com> wrote: >> >> https://www.youtube.com/watch?v=hihEhsdwiIk >> >> I am resurrecting this thread. Oh it's correct, may just need volume + context ^ -- Chris Wopat Network Engineer, WiscNet wopat(a)wiscnet.net 608-210-3965

July 31, 2017

Re: New Cabinet Pics

by Chris Wopat

On 07/31/2017 01:55 PM, DeLong, Owen wrote: > Methinks that was not the intended link. > > Owen > >> On Jul 31, 2017, at 11:08 , Justin Krejci <jkrejci(a)usinternet.com> wrote: >> >> https://www.youtube.com/watch?v=hihEhsdwiIk >> >> I am resurrecting this thread. Oh it's correct, may just need volume + context ^ -- Chris Wopat Network Engineer, WiscNet wopat(a)wiscnet.net 608-210-3965

July 31, 2017

Re: New Cabinet Pics

by DeLong, Owen

Methinks that was not the intended link. Owen > On Jul 31, 2017, at 11:08 , Justin Krejci <jkrejci(a)usinternet.com> wrote: > > https://www.youtube.com/watch?v=hihEhsdwiIk > > I am resurrecting this thread. If anyone is still interested in this kind of a solution of the breakout panel, I had my go-to guy for miscellaneous fiber bits and pieces get me a price on a few of these breakout panels with various options as I have run into a need for this type of product myself. Let me know if you want more info and I can pass you over his part numbers and his contact details. > > > > ________________________________________ > From: MICE Discuss [MICE-DISCUSS(a)LISTS.IPHOUSE.NET] on behalf of Jeremy Lumby [jlumby(a)MNVOIP.COM] > Sent: Wednesday, May 10, 2017 7:36 PM > To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET > Subject: Re: [MICE-DISCUSS] New Cabinet Pics > > Andy, > > I have received quite a few questions about the QSFP breakout panel, so I decided to answer your question plus more detail on list. I wish I had more info for you. I obtained it from a remote hands uninstall I did, and the owner did not care to have me ship it back. It has no markings on it, so I have no clue who made it, or what its model number might be. The main reason I loaned it to MICE was because the new switch had almost the same number of 10G ports that the old Juniper stack had. Since we were out of ports, had to delay new member connections, and needed extras to tie the Arista to the Juniper stack, I utilized QSFPs to get additional 10G ports to tie the switches together, as well as to connect all members that had expressed an interest in upgrading to 100G in the near future. This freed up a bunch of SFP+ ports for immediate use by new members. Since the process began, we have already had 3 QSFP28 100G connections go live freeing up 9 SFP+ ports. > > Jeremy > > -----Original Message----- > From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Andy Koch > Sent: Wednesday, May 10, 2017 4:26 PM > To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET > Subject: Re: [MICE-DISCUSS] New Cabinet Pics > > Thank you Jeremy, looking good. > > Question on the QSFP breakout panel: WiscNet is evaluating a couple of > these, but I have not seen the model that is installed here. What was > the source of this panel and do you have a model/manufacturer? > > Thanks for the info. > > Andy > > -- > Andy Koch > Network Engineer, WiscNet > akoch(a)wiscnet.net 608-210-3967 > > 10 May 2017 at 14:37:00, Jeremy Lumby wrote: >> I officially cleaned out the old 1/3 MICE cabinet today, and got some pictures of the new cabinet. I left them full resolution so that you can use them for other things. Since they were so large, I did not want to attach them, so they are at the following links. Special thanks again to Cologix, Anthony, Doug, Richard, and Jay for their assistance with the migration. >> >> http://www.mnvoip.com/mice/newcab1.jpg >> >> http://www.mnvoip.com/mice/newcab2.jpg >> >> http://www.mnvoip.com/mice/newcab3.jpg >> >> >> Jeremy Lumby >> Minnesota VoIP >> 9217 17th Ave S >> Suite 216 >> Bloomington, MN 55425 >> Main: 612-355-7740 x211 >> Direct: 612-392-6814 >> EFax: 952-873-7425 >> jlumby(a)mnvoip.com

July 31, 2017

Re: New Cabinet Pics

by Justin Krejci

https://www.youtube.com/watch?v=hihEhsdwiIk I am resurrecting this thread. If anyone is still interested in this kind of a solution of the breakout panel, I had my go-to guy for miscellaneous fiber bits and pieces get me a price on a few of these breakout panels with various options as I have run into a need for this type of product myself. Let me know if you want more info and I can pass you over his part numbers and his contact details. ________________________________________ From: MICE Discuss [MICE-DISCUSS(a)LISTS.IPHOUSE.NET] on behalf of Jeremy Lumby [jlumby(a)MNVOIP.COM] Sent: Wednesday, May 10, 2017 7:36 PM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] New Cabinet Pics Andy, I have received quite a few questions about the QSFP breakout panel, so I decided to answer your question plus more detail on list. I wish I had more info for you. I obtained it from a remote hands uninstall I did, and the owner did not care to have me ship it back. It has no markings on it, so I have no clue who made it, or what its model number might be. The main reason I loaned it to MICE was because the new switch had almost the same number of 10G ports that the old Juniper stack had. Since we were out of ports, had to delay new member connections, and needed extras to tie the Arista to the Juniper stack, I utilized QSFPs to get additional 10G ports to tie the switches together, as well as to connect all members that had expressed an interest in upgrading to 100G in the near future. This freed up a bunch of SFP+ ports for immediate use by new members. Since the process began, we have already had 3 QSFP28 100G connections go live freeing up 9 SFP+ ports. Jeremy -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Andy Koch Sent: Wednesday, May 10, 2017 4:26 PM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] New Cabinet Pics Thank you Jeremy, looking good. Question on the QSFP breakout panel: WiscNet is evaluating a couple of these, but I have not seen the model that is installed here. What was the source of this panel and do you have a model/manufacturer? Thanks for the info. Andy -- Andy Koch Network Engineer, WiscNet akoch(a)wiscnet.net 608-210-3967 10 May 2017 at 14:37:00, Jeremy Lumby wrote: > I officially cleaned out the old 1/3 MICE cabinet today, and got some pictures of the new cabinet. I left them full resolution so that you can use them for other things. Since they were so large, I did not want to attach them, so they are at the following links. Special thanks again to Cologix, Anthony, Doug, Richard, and Jay for their assistance with the migration. > > http://www.mnvoip.com/mice/newcab1.jpg > > http://www.mnvoip.com/mice/newcab2.jpg > > http://www.mnvoip.com/mice/newcab3.jpg > > > Jeremy Lumby > Minnesota VoIP > 9217 17th Ave S > Suite 216 > Bloomington, MN 55425 > Main: 612-355-7740 x211 > Direct: 612-392-6814 > EFax: 952-873-7425 > jlumby(a)mnvoip.com

July 31, 2017

Re: Arista 7508R Chassis'

by Mike Horwath

> On Jul 28, 2017, at 12:10, DeLong, Owen <00000005a669d12e-dmarc-request(a)LISTS.IPHOUSE.NET> wrote: > > Sounds like it might make a good show and tell for a UG meeting. I agree. -- Mike Horwath, reachable via drechsau(a)Geeks.ORG

July 28, 2017

WiscNet Maintenance in Minneapolis - 2017-08-09 00:01 - 06:00

by Chris Wopat

WiscNet will be performing software upgrades on our Minneapolis equipment beginning at midnight the morning of Wed August 9th. This will down all MICE sessions while the router upgrades. Expected downtime is about 30 minutes. Thanks, -- Chris Wopat Network Engineer, WiscNet wopat(a)wiscnet.net 608-210-3965

July 28, 2017

Re: Arista 7508R Chassis'

by DeLong, Owen

Sounds like it might make a good show and tell for a UG meeting. Owen On Jul 28, 2017, at 04:35 , Ben Wiechman <ben.wiechman(a)arvig.com<mailto:ben.wiechman@arvig.com>> wrote: Arvig would also be interested in this at some point. Ben Wiechman Director of Information Technology (Interim) Direct: 320.256.0184 Cell: 320.247.3224 ben.wiechman(a)arvig.com<mailto:ben.wiechman@arvig.com> 150 Second Street SW | Perham, MN 56573 | arvig.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__arvig.com&d=DwMFaQ&c=96…> On Thu, Jul 27, 2017 at 9:29 AM, Corey Hines <00000007b566cbe7-dmarc-request(a)lists.iphouse.net<mailto:00000007b566cbe7-dmarc-request@lists.iphouse.net>> wrote: Mike and MICE-Discuss, Side topic based on Mike's comments. Hardware labs of course require gear, but Arista also distributes EOS as veos-lab. This is EOS as a VM. Typically, you can put 8 front panel interfaces on the VM and use your hypervisor's virtual switches to connect them together. Now, a vswitch as interswitch link has a few caveats, but this is a great way to learn EOS and work with some of the features that has made us a network engineer's friend. Let me know if we can start a thread to discuss this further or if anyone wants to organize a virtual event to help MICE members build veos labs on ESXi, Ravello, vbox, or other hypervisor or platform like EVE-NG or even GNS3. I have personal experience with all but GNS3. Thanks everyone! -Corey On Thu, Jul 27, 2017 at 9:08 AM Mike Horwath <drechsau(a)geeks.org<mailto:drechsau@geeks.org>> wrote: On Wed, Jul 26, 2017 at 08:01:43PM +0000, DeLong, Owen wrote: > I favor MICE finding a way to add these to the exchange. I concur. I also have a lab that would love some Arista gear so I can get more knowledge on how it all works vs just reading things :) (not kidding on the lab, kidding on the request) -- Mike Horwath, reachable via drechsau(a)Geeks.ORG<mailto:drechsau@geeks.org> -- Corey Hines Systems Engineer Arista Networks m 612-209-6550<tel:(612)%20209-6550> o 408-547-8075<tel:(408)%20547-8075> chines(a)arista.com<mailto:chines@arista.com> TAC: support(a)arista.com<mailto:support@arista.com> www.arista.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.arista.com&d=DwMFaQ…> Arista EOS: A Tale of Opposite Architectures<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.youtube.com_watch-…> Download the EOS Configuration Manual<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.arista.com_assets_…> Install vEOS-lab for testing & training<https://urldefense.proofpoint.com/v2/url?u=https-3A__eos.arista.com_running…> ________________________________ To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.iphouse.net_cgi-2…> ________________________________ To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.iphouse.net_cgi-2…>

July 28, 2017

Re: Arista 7508R Chassis'

by Ben Wiechman

Arvig would also be interested in this at some point. Ben Wiechman Director of Information Technology (Interim) Direct: 320.256.0184 Cell: 320.247.3224 ben.wiechman(a)arvig.com 150 Second Street SW | Perham, MN 56573 | arvig.com On Thu, Jul 27, 2017 at 9:29 AM, Corey Hines < 00000007b566cbe7-dmarc-request(a)lists.iphouse.net> wrote: > Mike and MICE-Discuss, > > Side topic based on Mike's comments. Hardware labs of course require gear, > but Arista also distributes EOS as veos-lab. This is EOS as a VM. > Typically, you can put 8 front panel interfaces on the VM and use your > hypervisor's virtual switches to connect them together. Now, a vswitch as > interswitch link has a few caveats, but this is a great way to learn EOS > and work with some of the features that has made us a network engineer's > friend. > > Let me know if we can start a thread to discuss this further or if anyone > wants to organize a virtual event to help MICE members build veos labs on > ESXi, Ravello, vbox, or other hypervisor or platform like EVE-NG or even > GNS3. I have personal experience with all but GNS3. > > Thanks everyone! > > -Corey > > On Thu, Jul 27, 2017 at 9:08 AM Mike Horwath <drechsau(a)geeks.org> wrote: > >> On Wed, Jul 26, 2017 at 08:01:43PM +0000, DeLong, Owen wrote: >> > I favor MICE finding a way to add these to the exchange. >> >> I concur. >> >> I also have a lab that would love some Arista gear so I can get more >> knowledge on how it all works vs just reading things :) (not kidding >> on the lab, kidding on the request) >> >> -- >> Mike Horwath, reachable via drechsau(a)Geeks.ORG >> > -- > Corey Hines > Systems Engineer > Arista Networks > m 612-209-6550 <(612)%20209-6550> > o 408-547-8075 <(408)%20547-8075> > chines(a)arista.com > TAC: support(a)arista.com > www.arista.com > Arista EOS: A Tale of Opposite Architectures > <https://www.youtube.com/watch?v=Hfwr6sY27hA&authuser=1> > Download the EOS Configuration Manual > <https://www.arista.com/assets/data/docs/Manuals/EOS-4.15.4F-Manual.pdf> > Install vEOS-lab for testing & training > <https://eos.arista.com/running-veos-on-esxi-5-5/> > > > ------------------------------ > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 >

July 28, 2017

Re: Arista 7508R Chassis'

by Mike Horwath

On Thu, Jul 27, 2017 at 02:29:09PM +0000, Corey Hines wrote: > Mike and MICE-Discuss, > > Side topic based on Mike's comments. Hardware labs of course require > gear, but Arista also distributes EOS as veos-lab. This is EOS as a > VM. That's awesome. Thanks Mr. Hines! I might have to .. email you later. -- Mike Horwath, reachable via drechsau(a)Geeks.ORG

July 27, 2017

Re: Arista 7508R Chassis'

by Corey Hines

Mike and MICE-Discuss, Side topic based on Mike's comments. Hardware labs of course require gear, but Arista also distributes EOS as veos-lab. This is EOS as a VM. Typically, you can put 8 front panel interfaces on the VM and use your hypervisor's virtual switches to connect them together. Now, a vswitch as interswitch link has a few caveats, but this is a great way to learn EOS and work with some of the features that has made us a network engineer's friend. Let me know if we can start a thread to discuss this further or if anyone wants to organize a virtual event to help MICE members build veos labs on ESXi, Ravello, vbox, or other hypervisor or platform like EVE-NG or even GNS3. I have personal experience with all but GNS3. Thanks everyone! -Corey On Thu, Jul 27, 2017 at 9:08 AM Mike Horwath <drechsau(a)geeks.org> wrote: > On Wed, Jul 26, 2017 at 08:01:43PM +0000, DeLong, Owen wrote: > > I favor MICE finding a way to add these to the exchange. > > I concur. > > I also have a lab that would love some Arista gear so I can get more > knowledge on how it all works vs just reading things :) (not kidding > on the lab, kidding on the request) > > -- > Mike Horwath, reachable via drechsau(a)Geeks.ORG > -- Corey Hines Systems Engineer Arista Networks m 612-209-6550 o 408-547-8075 chines(a)arista.com TAC: support(a)arista.com www.arista.com Arista EOS: A Tale of Opposite Architectures <https://www.youtube.com/watch?v=Hfwr6sY27hA&authuser=1> Download the EOS Configuration Manual <https://www.arista.com/assets/data/docs/Manuals/EOS-4.15.4F-Manual.pdf> Install vEOS-lab for testing & training <https://eos.arista.com/running-veos-on-esxi-5-5/>

July 27, 2017

Re: Arista 7508R Chassis'

by Mike Horwath

On Wed, Jul 26, 2017 at 08:01:43PM +0000, DeLong, Owen wrote: > I favor MICE finding a way to add these to the exchange. I concur. I also have a lab that would love some Arista gear so I can get more knowledge on how it all works vs just reading things :) (not kidding on the lab, kidding on the request) -- Mike Horwath, reachable via drechsau(a)Geeks.ORG

July 27, 2017

Re: Arista 7508R Chassis'

by DeLong, Owen

I favor MICE finding a way to add these to the exchange. Owen On Jul 26, 2017, at 06:41 , John McLaughlin <00000006ae0bfcb7-dmarc-request(a)LISTS.IPHOUSE.NET<mailto:00000006ae0bfcb7-dmarc-request@lists.iphouse.net>> wrote: Good Morning Mice Members: We have run into a situation where we may have (2) new 7508 chassis’ available at no charge. If you’re interested in accepting shipment on these as early as next week and commit to using them in your lab or network (not for resale) please contact me at your earliest convenience. Please review the attached data sheet for sizing & power information. We have a number of new MICE Members as customers so we thought it would be best to send out to all members and go from there. If there is more than one member interested and able to accept shipment next week we could raffle them off over a lunch or something similar. ________________________________ To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.iphouse.net_cgi-2…> <7500RDataSheet.pdf> Thank you all for your continued support and interest in Arista! -JMc John McLaughlin 612-816-9024 Major Accounts Manager jmclaughlin(a)arista.com<mailto:jmclaughlin@arista.com> ________________________________ To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.iphouse.net_cgi-2…> <PastedGraphic-1.tiff> ________________________________ To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.iphouse.net_cgi-2…>

July 26, 2017

Re: Arista 7508R Chassis'

by Scott Strelitz

What is this about? Scott Strelitz Regional Sales Director, North Central Arista Networks, Inc 1-847-833-5330 Mobile sstrelitz(a)arista.com Mail www.arista.com > On Jul 26, 2017, at 8:41 AM, John McLaughlin <00000006ae0bfcb7-dmarc-request(a)LISTS.IPHOUSE.NET> wrote: > > Good Morning Mice Members: > > We have run into a situation where we may have (2) new 7508 chassis’ available at no charge. If you’re interested in accepting shipment on these as early as next week > and commit to using them in your lab or network (not for resale) please contact me at your earliest convenience. Please review the attached data sheet for sizing & power > information. > > We have a number of new MICE Members as customers so we thought it would be best to send out to all members and go from there. If there is more than one member > interested and able to accept shipment next week we could raffle them off over a lunch or something similar. > > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 > > <7500RDataSheet.pdf> > > Thank you all for your continued support and interest in Arista! > > -JMc > > John McLaughlin > 612-816-9024 > Major Accounts Manager > jmclaughlin(a)arista.com > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 > > <PastedGraphic-1.tiff> > > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

July 26, 2017

Arista 7508R Chassis'

by John McLaughlin

Good Morning Mice Members: We have run into a situation where we may have (2) new 7508 chassis’ available at no charge. If you’re interested in accepting shipment on these as early as next week and commit to using them in your lab or network (not for resale) please contact me at your earliest convenience. Please review the attached data sheet for sizing & power information. We have a number of new MICE Members as customers so we thought it would be best to send out to all members and go from there. If there is more than one member interested and able to accept shipment next week we could raffle them off over a lunch or something similar. Thank you all for your continued support and interest in Arista! -JMc John McLaughlin 612-816-9024 Major Accounts Manager jmclaughlin(a)arista.com

July 26, 2017