- mice-discuss - lists.micemn.net

Re: Akamai Cluster Help

by Owen DeLong

If the servers are using NEMA 5-20P plugs (20A), we should make sure that we are not overloading any of the PDUs based on the number of servers and their actual load. 20P plugs are one horizontal and one vertical. If they have two vertical prongs, then they are NEMA 5-15P plugs which are much more likely on servers that are not drawing very high amperages. Owen On Sep 28, 2011, at 2:28 PM, Anthony Anderberg wrote: > Plug is NEMA 5-20P, the receptacles are NEMA 5-20R with the T-shaped neutral that can take 15A or 20A cords. > > Just to be sure - ten receptacles are enough? > > > Anthony Anderberg > Sr. Systems Analyst > 320-234-5239 > anthonyanderberg(a)nu-telecom.net > www.nutelecom.net > > > -----Original Message----- > From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke > Sent: Wednesday, September 28, 2011 3:54 PM > To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET > Subject: Re: [MICE-DISCUSS] Akamai Cluster Help > >> What kind of plugs (volt/amp) do those PDUs need to be? >> I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V. >> > > I've got all the servers in the rack and cabled to the switches. > > All the servers are 110 VAC so those would work great. What kind of > plug is on the cord? > > Jay > > ######################################################################## > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 > > ######################################################################## > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jay Hanke

On Wed, Sep 28, 2011 at 4:28 PM, Anthony Anderberg <anthonyanderberg(a)nu-telecom.net> wrote: > Plug is NEMA 5-20P, the receptacles are NEMA 5-20R with the T-shaped neutral that can take 15A or 20A cords. > > Just to be sure - ten receptacles are enough? We would need two of them. 10 Servers, 2 switches, 1 (or 2) router (13 so far) ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Anthony Anderberg

Plug is NEMA 5-20P, the receptacles are NEMA 5-20R with the T-shaped neutral that can take 15A or 20A cords. Just to be sure - ten receptacles are enough? Anthony Anderberg Sr. Systems Analyst 320-234-5239 anthonyanderberg(a)nu-telecom.net www.nutelecom.net -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 3:54 PM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] Akamai Cluster Help > What kind of plugs (volt/amp) do those PDUs need to be? > I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V. > I've got all the servers in the rack and cabled to the switches. All the servers are 110 VAC so those would work great. What kind of plug is on the cord? Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jay Hanke

> What kind of plugs (volt/amp) do those PDUs need to be? > I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V. > I've got all the servers in the rack and cabled to the switches. All the servers are 110 VAC so those would work great. What kind of plug is on the cord? Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Anthony Anderberg

I can help with those tasks, although if the servers are big know that I have puny arms. :-) What kind of plugs (volt/amp) do those PDUs need to be? I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V. Jay: Do we have an ETA on that router? Anthony Anderberg Sr. Systems Analyst 320-234-5239 anthonyanderberg(a)nu-telecom.net www.nutelecom.net -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 9:37 AM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: [MICE-DISCUSS] Akamai Cluster Help We need volunteers for the following: -Install PDU and wire up server and switch power cords -Install Akamai router (not yet arrived) -Power up servers and do any remaining initial provisioning (After IP connectivity is established) -Akamai built in Route Servers Please reply to the list so everyone knows what's going on. Thanks, Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Matthew Beckwell

I 'm available to help with any of the items >17:00CT the rest of the week... Or anytime Saturday, Sunday, or Next week (10/3 - 10/7) ~Matthew -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 9:37 AM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: [MICE-DISCUSS] Akamai Cluster Help We need volunteers for the following: -Install PDU and wire up server and switch power cords -Install Akamai router (not yet arrived) -Power up servers and do any remaining initial provisioning (After IP connectivity is established) -Akamai built in Route Servers Please reply to the list so everyone knows what's going on. Thanks, Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jeremy Lumby

All -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 10:56 AM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] Akamai Cluster Help On Wed, Sep 28, 2011 at 10:46 AM, Jeremy Lumby <jlumby(a)mnvoip.com> wrote: > I am willing to help > Which item(s)? Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jay Hanke

On Wed, Sep 28, 2011 at 10:46 AM, Jeremy Lumby <jlumby(a)mnvoip.com> wrote: > I am willing to help > Which item(s)? Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jeremy Lumby

I am willing to help -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 9:37 AM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: [MICE-DISCUSS] Akamai Cluster Help We need volunteers for the following: -Install PDU and wire up server and switch power cords -Install Akamai router (not yet arrived) -Power up servers and do any remaining initial provisioning (After IP connectivity is established) -Akamai built in Route Servers Please reply to the list so everyone knows what's going on. Thanks, Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Akamai Cluster Help

by Jay Hanke

We need volunteers for the following: -Install PDU and wire up server and switch power cords -Install Akamai router (not yet arrived) -Power up servers and do any remaining initial provisioning (After IP connectivity is established) -Akamai built in Route Servers Please reply to the list so everyone knows what's going on. Thanks, Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011