September 2011 - mice-discuss

Re: Akamai Cluster Help

by Owen DeLong

On Sep 28, 2011, at 2:48 PM, Hannigan, Martin wrote: > On 9/28/11 5:45 PM, "Jay Hanke" <jayhanke(a)MANKATONETWORKS.NET> wrote: > >>> 20P plugs are one horizontal and one vertical. If they have two vertical >>> prongs, then >>> they are NEMA 5-15P plugs which are much more likely on servers that are not >>> drawing very high amperages. >> >> The servers are all 5-15P. The outlet above the rack is a 20A twist >> lock so we'll need an adapter. >> >> Jay >> > > > Folks, > > We'd prefer that none of our equipment be modified without consultation of > our deployment engineer responsible for this deployment. I'm sure that we'll > be able to accommodate whatever environment that we need to and rapidly. > > Best, > > -M< I don't think anyone said anything about modifying your equipment, Marty. Ideally, the PDUs that provide the NEMA 5-20R or 5-15R receptacles in the rack should have the NEMA L5-20P on their input cord. Then, all that remains is to make sure that the total load being connected to each PDU does not exceed 18A max or 15A continuous. (You should always run a circuit with 25% continuous headroom and 10% max draw headroom in order to allow for line losses, etc.). Owen ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Hannigan, Martin

On 9/28/11 5:45 PM, "Jay Hanke" <jayhanke(a)MANKATONETWORKS.NET> wrote: >> 20P plugs are one horizontal and one vertical. If they have two vertical >> prongs, then >> they are NEMA 5-15P plugs which are much more likely on servers that are not >> drawing very high amperages. > > The servers are all 5-15P. The outlet above the rack is a 20A twist > lock so we'll need an adapter. > > Jay > Folks, We'd prefer that none of our equipment be modified without consultation of our deployment engineer responsible for this deployment. I'm sure that we'll be able to accommodate whatever environment that we need to and rapidly. Best, -M< ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jay Hanke

> 20P plugs are one horizontal and one vertical. If they have two vertical prongs, then > they are NEMA 5-15P plugs which are much more likely on servers that are not > drawing very high amperages. The servers are all 5-15P. The outlet above the rack is a 20A twist lock so we'll need an adapter. Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Owen DeLong

If the servers are using NEMA 5-20P plugs (20A), we should make sure that we are not overloading any of the PDUs based on the number of servers and their actual load. 20P plugs are one horizontal and one vertical. If they have two vertical prongs, then they are NEMA 5-15P plugs which are much more likely on servers that are not drawing very high amperages. Owen On Sep 28, 2011, at 2:28 PM, Anthony Anderberg wrote: > Plug is NEMA 5-20P, the receptacles are NEMA 5-20R with the T-shaped neutral that can take 15A or 20A cords. > > Just to be sure - ten receptacles are enough? > > > Anthony Anderberg > Sr. Systems Analyst > 320-234-5239 > anthonyanderberg(a)nu-telecom.net > www.nutelecom.net > > > -----Original Message----- > From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke > Sent: Wednesday, September 28, 2011 3:54 PM > To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET > Subject: Re: [MICE-DISCUSS] Akamai Cluster Help > >> What kind of plugs (volt/amp) do those PDUs need to be? >> I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V. >> > > I've got all the servers in the rack and cabled to the switches. > > All the servers are 110 VAC so those would work great. What kind of > plug is on the cord? > > Jay > > ######################################################################## > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 > > ######################################################################## > > To unsubscribe from the MICE-DISCUSS list, click the following link: > http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jay Hanke

On Wed, Sep 28, 2011 at 4:28 PM, Anthony Anderberg <anthonyanderberg(a)nu-telecom.net> wrote: > Plug is NEMA 5-20P, the receptacles are NEMA 5-20R with the T-shaped neutral that can take 15A or 20A cords. > > Just to be sure - ten receptacles are enough? We would need two of them. 10 Servers, 2 switches, 1 (or 2) router (13 so far) ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Anthony Anderberg

Plug is NEMA 5-20P, the receptacles are NEMA 5-20R with the T-shaped neutral that can take 15A or 20A cords. Just to be sure - ten receptacles are enough? Anthony Anderberg Sr. Systems Analyst 320-234-5239 anthonyanderberg(a)nu-telecom.net www.nutelecom.net -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 3:54 PM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] Akamai Cluster Help > What kind of plugs (volt/amp) do those PDUs need to be? > I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V. > I've got all the servers in the rack and cabled to the switches. All the servers are 110 VAC so those would work great. What kind of plug is on the cord? Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jay Hanke

> What kind of plugs (volt/amp) do those PDUs need to be? > I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V. > I've got all the servers in the rack and cabled to the switches. All the servers are 110 VAC so those would work great. What kind of plug is on the cord? Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Anthony Anderberg

I can help with those tasks, although if the servers are big know that I have puny arms. :-) What kind of plugs (volt/amp) do those PDUs need to be? I've got a couple 10 plug 110V/20A 1U horizontal units in need of a good home, but perhaps we want 208V. Jay: Do we have an ETA on that router? Anthony Anderberg Sr. Systems Analyst 320-234-5239 anthonyanderberg(a)nu-telecom.net www.nutelecom.net -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 9:37 AM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: [MICE-DISCUSS] Akamai Cluster Help We need volunteers for the following: -Install PDU and wire up server and switch power cords -Install Akamai router (not yet arrived) -Power up servers and do any remaining initial provisioning (After IP connectivity is established) -Akamai built in Route Servers Please reply to the list so everyone knows what's going on. Thanks, Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Matthew Beckwell

I 'm available to help with any of the items >17:00CT the rest of the week... Or anytime Saturday, Sunday, or Next week (10/3 - 10/7) ~Matthew -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 9:37 AM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: [MICE-DISCUSS] Akamai Cluster Help We need volunteers for the following: -Install PDU and wire up server and switch power cords -Install Akamai router (not yet arrived) -Power up servers and do any remaining initial provisioning (After IP connectivity is established) -Akamai built in Route Servers Please reply to the list so everyone knows what's going on. Thanks, Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011

Re: Akamai Cluster Help

by Jeremy Lumby

All -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Jay Hanke Sent: Wednesday, September 28, 2011 10:56 AM To: MICE-DISCUSS(a)LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] Akamai Cluster Help On Wed, Sep 28, 2011 at 10:46 AM, Jeremy Lumby <jlumby(a)mnvoip.com> wrote: > I am willing to help > Which item(s)? Jay ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1 ######################################################################## To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

Sept. 28, 2011