Dang, I thought we sent a note about that not too long ago. Acentek is PO5 on our remote, comprised of Eth 1/6 and 1/7 (if you care) Thanks! Dean -----Original Message----- From: MICE Discuss <MICE-DISCUSS@LISTS.IPHOUSE.NET> On Behalf Of Jay Hanke Sent: Monday, April 26, 2021 2:04 PM To: MICE-DISCUSS@LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] Old/Stale Infrastructure information - IXP Dashboard / AcenTek I don't think we got the notice from the remote switch operator. Steve/Dean do you have the new port info for Acentek? On Mon, Apr 26, 2021 at 2:00 PM Jesse Reed <jreed@acentek.net> wrote:

To whom it may concern:

Earlier this year, AcenTek worked w/someone to turn up a 2nd link inside a 20 Gig port-ch @ the 511 building facing our equipment. Logging into the IXP portal today, we see that our information is still only reflective of 1 single 10 Gig link. Can this information be updated accordingly inside the AcenTek portal?

Thanks ahead of time,

Jesse Reed

-- Jay Hanke, President South Front Networks jayhanke@southfront.io Phone 612-204-0000

Thanks everyone; much appreciated! Jesse -----Original Message----- From: MICE Discuss <MICE-DISCUSS@LISTS.IPHOUSE.NET> On Behalf Of Jay Hanke Sent: Monday, April 26, 2021 2:39 PM To: MICE-DISCUSS@LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] Old/Stale Infrastructure information - IXP Dashboard / AcenTek EXTERNAL: This email originated from a sender outside AcenTek. Do not click links or open attachments unless you recognize the sender and know the content is safe. No problem. I moved the port into their LAG in the portal. Graphs in the portal should update in 24 hours. On Mon, Apr 26, 2021 at 2:06 PM Dean Bahls <dean.bahls@cooperative-networks.com> wrote:

Dang, I thought we sent a note about that not too long ago. Acentek is PO5 on our remote, comprised of Eth 1/6 and 1/7 (if you care)

Thanks!

Dean

-----Original Message----- From: MICE Discuss <MICE-DISCUSS@LISTS.IPHOUSE.NET> On Behalf Of Jay Hanke Sent: Monday, April 26, 2021 2:04 PM To: MICE-DISCUSS@LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] Old/Stale Infrastructure information - IXP Dashboard / AcenTek

I don't think we got the notice from the remote switch operator.

Steve/Dean do you have the new port info for Acentek?

On Mon, Apr 26, 2021 at 2:00 PM Jesse Reed <jreed@acentek.net> wrote:

...

To whom it may concern:

Earlier this year, AcenTek worked w/someone to turn up a 2nd link inside a 20 Gig port-ch @ the 511 building facing our equipment. Logging into the IXP portal today, we see that our information is still only reflective of 1 single 10 Gig link. Can this information be updated accordingly inside the AcenTek portal?

Thanks ahead of time,

Jesse Reed

-- Jay Hanke, President South Front Networks jayhanke@southfront.io Phone 612-204-0000

-- Jay Hanke, President South Front Networks jayhanke@southfront.io Phone 612-204-0000

I believe their ASN is disconnected from MICE. We still have IP assignments in the system but no ports other than for the remote uplinks. On Mon, Apr 26, 2021 at 2:40 PM Richard Laager <rlaager@wiktel.com> wrote:

On 4/26/21 2:06 PM, Dean Bahls wrote:

...

Acentek is PO5 on our remote, comprised of Eth 1/6 and 1/7 (if you care)

Okay, but then where is CNS (AS32609, which is currently listed as 1/6 on the website)?

-- Richard

-- Jay Hanke, President South Front Networks jayhanke@southfront.io Phone 612-204-0000