Yes, but I'll go do it again. That part of the config hasn't been changed since initial setup. On Fri, Apr 30, 2021 at 01:01:00PM +0000, Frank Bulk wrote:
Has someone HUP’d it, yet?
Frank
From: MICE Discuss <MICE-DISCUSS@LISTS.IPHOUSE.NET> On Behalf Of Andrew Hoyos Sent: Tuesday, April 27, 2021 12:54 PM To: MICE-DISCUSS@LISTS.IPHOUSE.NET Subject: Re: [MICE-DISCUSS] Zayo Belle Plaine - April 15th
Same here. Perhaps the BFD daemon on rs2 needs to be HUP’d to pick up values in config file?
Detect Transmit Address State Interface Time Interval Multiplier 2001:504:27::d1af:0:1 Up xe-0/1/0.0 1.500 0.500 3 Client BGP, TX interval 0.500, RX interval 0.500 Session up time 2w1d 16:53:02, previous down time 00:00:00 Local diagnostic None, remote diagnostic None Remote state Up, version 1 Session type: Single hop BFD Min async interval 0.500, min slow interval 1.000 Adaptive async TX interval 0.500, RX interval 0.500 Local min TX interval 0.500, minimum RX interval 0.500, multiplier 3 Remote min TX interval 0.500, min RX interval 0.500, multiplier 3 Local discriminator 19, remote discriminator 2630753610 Echo mode disabled/inactive Session ID: 0x0
Detect Transmit Address State Interface Time Interval Multiplier 2001:504:27::d1af:0:2 Up xe-0/1/0.0 2.500 0.500 3 Client BGP, TX interval 0.500, RX interval 0.500 Session up time 2w1d 16:52:42, previous down time 00:00:00 Local diagnostic None, remote diagnostic None Remote state Up, version 1 Session type: Single hop BFD Min async interval 0.500, min slow interval 1.000 Adaptive async TX interval 0.500, RX interval 0.500 Local min TX interval 0.500, minimum RX interval 0.500, multiplier 3 Remote min TX interval 0.100, min RX interval 0.010, multiplier 5 Local discriminator 20, remote discriminator 3118078092 Echo mode disabled/inactive Session ID: 0x0
On Apr 27, 2021, at 12:27 PM, Justin Krejci <JKrejci@USINTERNET.COM<mailto:JKrejci@USINTERNET.COM>> wrote:
We are not getting identical BFD timers or multiplier values from RS1 and RS2.
(added blank lines for readability) usi-cr02-mpls#show bfd peers bfd interface ethernet24/1 detail | i ^Peer|^Received|^TxI Peer Addr 206.108.255.1, Intf Ethernet24/1, Type normal, State Up TxInt: 500, RxInt: 500, Multiplier: 3 Received RxInt: 500, Received Multiplier: 3 Peer Addr 206.108.255.2, Intf Ethernet24/1, Type normal, State Up TxInt: 500, RxInt: 500, Multiplier: 3 Received RxInt: 10, Received Multiplier: 5 Peer Addr 2001:504:27::d1af:0:1, Intf Ethernet24/1, Type normal, State Up TxInt: 500, RxInt: 500, Multiplier: 3 Received RxInt: 500, Received Multiplier: 3 Peer Addr 2001:504:27::d1af:0:2, Intf Ethernet24/1, Type normal, State Up TxInt: 500, RxInt: 500, Multiplier: 3 Received RxInt: 10, Received Multiplier: 5
________________________________ To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
________________________________
To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1