I think the internal port is the opposite pfe in the same chassis. IIRC EX4200 is two pfe in the same box, EX3200 is one pfe On Tue, Sep 20, 2016 at 1:58 PM, Jeremy Lumby <jlumby@mnvoip.com> wrote:
I agree, I am confused to what the second two mean as well. I was surprised to see internal 1/24, as well as no intermediate interface in the lossless ones. I expected to see all vcp-1 or vcp-0 in the middle
*From:* MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] *On Behalf Of *Matthew Beckwell *Sent:* Tuesday, September 20, 2016 1:51 PM *To:* MICE-DISCUSS@LISTS.IPHOUSE.NET *Subject:* Re: [MICE-DISCUSS] EX4200 (1G Switch) Packet Loss -> 10G Participants
Yeah, we should set aside the ae5 test data for the moment...because I agree it's confusing when it's split across 2 switches.
I'd have to rely on someone who speaks Juniper as to what the various paths mean....
"vcp-1" vs "internal-1/24" vs nothing?...
Although- it looks like so far all the paths with loss seem to have "vcp-1" in them?
~Matthew
On Tue, Sep 20, 2016 at 1:28 PM, Jeremy Lumby <jlumby@mnvoip.com> wrote:
Matthew,
The switch throws out an error if I set the destination port as an agg port. However I did all of their member ports individually if that helps you. Personally I think AE bundles on different switches should probably be ignored as data points to keep the troubleshooting straightforward.
jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-2/0/11
vc-path from ge-1/0/15 to xe-2/0/11
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 xe-2/0/11
{master:1}
jlumby@MICE-SW1> ...ce ge-1/0/15 destination-interface xe-0/0/35
vc-path from ge-1/0/15 to xe-0/0/35
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 1 3 internal-1/24
2 0 1 xe-0/0/35
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/3
vc-path from ge-1/0/15 to xe-0/0/3
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 vcp-1
2 0 0 xe-0/0/3
{master:1}
jlumby@MICE-SW1> ...e-interface ge-1/0/15 destination-interface xe-0/0/13
vc-path from ge-1/0/15 to xe-0/0/13
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 vcp-1
2 0 0 xe-0/0/13
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/29
vc-path from ge-1/0/15 to xe-0/0/29
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 1 3 internal-1/24
2 0 1 xe-0/0/29
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-0/0/38
vc-path from ge-1/0/15 to xe-0/0/38
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 1 3 internal-1/24
2 0 1 xe-0/0/38
{master:1}
jlumby@MICE-SW1> ...-interface ge-1/0/15 destination-interface xe-2/0/15
vc-path from ge-1/0/15 to xe-2/0/15
Hop Member PFE-Device Interface
0 1 4 ge-1/0/15
1 2 6 xe-2/0/15
------------------------------
To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
------------------------------
To unsubscribe from the MICE-DISCUSS list, click the following link: http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1
-- Jay Hanke CTO Neutral Path Communications 3 Civic Center Plaza, Suite 204 Mankato, MN 56001 (507) 327-2398 mobile jayhanke@neutralpath.net www.neutralpath.net