Has someone HUP’d it, yet?

 

Frank

 

From: MICE Discuss <MICE-DISCUSS@LISTS.IPHOUSE.NET> On Behalf Of Andrew Hoyos
Sent: Tuesday, April 27, 2021 12:54 PM
To: MICE-DISCUSS@LISTS.IPHOUSE.NET
Subject: Re: [MICE-DISCUSS] Zayo Belle Plaine - April 15th

 

Same here. Perhaps the BFD daemon on rs2 needs to be HUP’d to pick up values in config file?

 

 

                                                  Detect   Transmit

Address                  State     Interface      Time     Interval  Multiplier

2001:504:27::d1af:0:1    Up        xe-0/1/0.0     1.500     0.500        3   

 Client BGP, TX interval 0.500, RX interval 0.500

 Session up time 2w1d 16:53:02, previous down time 00:00:00

 Local diagnostic None, remote diagnostic None

 Remote state Up, version 1

 Session type: Single hop BFD

 Min async interval 0.500, min slow interval 1.000

 Adaptive async TX interval 0.500, RX interval 0.500

 Local min TX interval 0.500, minimum RX interval 0.500, multiplier 3

 Remote min TX interval 0.500, min RX interval 0.500, multiplier 3

 Local discriminator 19, remote discriminator 2630753610

 Echo mode disabled/inactive Session ID: 0x0

 

                                                  Detect   Transmit

Address                  State     Interface      Time     Interval  Multiplier

2001:504:27::d1af:0:2    Up        xe-0/1/0.0     2.500     0.500        3   

 Client BGP, TX interval 0.500, RX interval 0.500

 Session up time 2w1d 16:52:42, previous down time 00:00:00

 Local diagnostic None, remote diagnostic None

 Remote state Up, version 1

 Session type: Single hop BFD

 Min async interval 0.500, min slow interval 1.000

 Adaptive async TX interval 0.500, RX interval 0.500

 Local min TX interval 0.500, minimum RX interval 0.500, multiplier 3

 Remote min TX interval 0.100, min RX interval 0.010, multiplier 5

 Local discriminator 20, remote discriminator 3118078092

 Echo mode disabled/inactive Session ID: 0x0







On Apr 27, 2021, at 12:27 PM, Justin Krejci <JKrejci@USINTERNET.COM> wrote:

 

We are not getting identical BFD timers or multiplier values from RS1 and RS2.

 

(added blank lines for readability)

usi-cr02-mpls#show bfd peers bfd interface ethernet24/1 detail | i ^Peer|^Received|^TxI

Peer Addr 206.108.255.1, Intf Ethernet24/1, Type normal, State Up 
TxInt: 500, RxInt: 500, Multiplier: 3 
Received RxInt: 500, Received Multiplier: 3 

Peer Addr 206.108.255.2, Intf Ethernet24/1, Type normal, State Up 
TxInt: 500, RxInt: 500, Multiplier: 3 
Received RxInt: 10, Received Multiplier: 5 

Peer Addr 2001:504:27::d1af:0:1, Intf Ethernet24/1, Type normal, State Up 
TxInt: 500, RxInt: 500, Multiplier: 3 
Received RxInt: 500, Received Multiplier: 3 

Peer Addr 2001:504:27::d1af:0:2, Intf Ethernet24/1, Type normal, State Up 
TxInt: 500, RxInt: 500, Multiplier: 3 
Received RxInt: 10, Received Multiplier: 5



 

 


To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1

 

 


To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1



To unsubscribe from the MICE-DISCUSS list, click the following link:
http://lists.iphouse.net/cgi-bin/wa?SUBED1=MICE-DISCUSS&A=1