The two MICE-attached routers I'm responsible for look OK, and about the same as they have looked recently: 206.108.255.1 4 53679 10130010 700710 305989456 0 0 1y11w 56003 206.108.255.2 4 53679 9531122 656345 305989456 0 0 1y7w 56001 -- 206.108.255.1 0 53679 14571189 909087 587718403 0 0 46w5d 55942 206.108.255.2 0 53679 14593796 908792 587718403 0 0 46w5d 55940 The MICE Looking Glass seems about the same: telnet://rviews:@route-server.micemn.net:23 206.108.255.1 4 53679 5001870 255450 11721640 0 0 23w0d 56004 206.108.255.2 4 53679 4998551 255464 11721640 0 0 23w0d 56002 The "no bgp enforce-first-as" config is expected on some platforms: http://www.micemn.net/technical.html Is traffic flowing normally otherwise? Perhaps you're running into an L1/L2 or MTU issue such that this is a symptom of another problem? Cheers, anthony -----Original Message----- From: MICE Discuss [mailto:MICE-DISCUSS@LISTS.IPHOUSE.NET] On Behalf Of Frank Bulk Sent: Wednesday, June 27, 2018 1:25 PM To: MICE-DISCUSS@LISTS.IPHOUSE.NET Subject: [MICE-DISCUSS] Not learning all routes from RR#2 We (AS53347) moved to a new border router overnight and had some issues with getting our MICE route reflector peerings up -- we'd learn a route or two per second. We had to tweak our Arista's BGP configuration to not "enforce-first-as". Most other direct peers were fine. Eventually RR #1 came up just fine, but RR #2 continues to languish, learning just learning about 10,900 routes. SiouxCenter-Arista-North(s1)#show ip bgp sum BGP summary information for VRF default Router identifier 207.32.15.22, local AS number 18883 Neighbor Status Codes: m - Under maintenance Neighbor V AS MsgRcvd MsgSent InQ OutQ Up/Down State PfxRcd PfxAcc 206.108.255.1 4 53679 44493 4138 0 0 10:56:46 Estab 56188 56188 206.108.255.2 4 53679 39124 7640 0 0 11:38:40 Estab 10929 10929 I'm not sure if we have remote access to the RR's, but whoever does, any hints as to why we're experiencing this behavior? Frank